Webtec Deliver More Power for Less!
Hydraulic engineers in need of an in-line flow control valve to
regulate motor or cylinder speed on construction and agricultural
machinery applications need look no further than Webtec’s new
high-pressure VFD190 series, which brings
Webtec’s range of hydraulic flow control valves to over 800 models and
counting.
The new range has both a 66% higher operating pressure and maximum
inlet flow capability than the existing Webtec 2FV series, but due to
its larger one-inch port size and highly optimised mechanical design has
a substantially reduced pressure drop, meaning heat generation can be
cut in half resulting in significantly lower fuel consumption.
Aimed at applications such as controlling the speed of operation of
hydraulic hammers, crushers, screeners, spreaders and conveyors this
three-port variable priority flow divider is nearly immune to rapid
changes in load, with adaptive pressure compensation enabling both the
regulated and by-pass flows to be used to drive separate circuits.
The VFD190 has a single turn knob to smoothly control the flow even
under full pressure and is rated up to 190 lpm (50 gpm) inlet flo, at
pressures up to 420 bar (6000 psi) and comes in 5 sizes with both BSPP
and SAE ports available.
| Working Pressure (Max) |
Total flow capacity |
Material |
Weight |
Mounting |
| Up to 420 bar (6000 psi) |
190 lpm (50 USgpm) |
Steel components in cast SG iron body painted black; aluminium knob |
3.5 to 4.0Kg (7.7 to 8.8lbs) |
Two bolt – M8 or 5/16” |
Would you like to see one “in the flesh”? We’re exhibiting at
Lamma 2016, (Wednesday 20th January and Thursday 21st January) so why not pop along and say hello.
For more information on the VFD190 series variable priority flow dividers please contact us on tel 01603 424880.
 |
| VFD190 series variable priority flow divider |
